Car Wash Bumper Blaster
Car Wash Bumper Blaster
The AVW Bumper Blasters are designed to help clean the front and rear surfaces of vehicles. There are two models; stationary oscillating or following oscillating.
Spinning Wheel Blaster
AVW’s spinning wheel blaster delivers high-pressure, targeted cleaning performance for the dirtiest areas of every vehicle. Built specifically for high-volume car washes that demand exceptional clean-and-shine quality, this automatic wheel blaster removes stubborn road grime, caked-on brake dust, and heavy buildup from wheels, tires, whitewalls, and wheel wells.
Using water-pressure-driven rotation, the system maximizes spray coverage while occupying a minimal footprint in your car wash tunnel. Constructed from heavy-gauge stainless steel, AVW wheel blasters are engineered for long-term durability, low maintenance, and continuous high-performance operation.
Key Features & Operational Design
Designed with operator efficiency in mind, the AVW wheel blaster features a straightforward, dependable design with minimal moving parts to reduce wear and downtime. Available in various configurations—including 4-arm or 6-arm manifolds, hexagon or round shroud designs, and fixed or pneumatic retractable assemblies—it seamlessly integrates into any existing tunnel layout.
Equipment details
Specs
Videos
Downloads
| Parameter | Hexagon Shroud Model | Round Shroud Model |
| Manufacturer | AVW Equipment Company, Inc. | AVW Equipment Company, Inc. |
| Equipment Type | Pivoting Oscillating High Pressure Spinning Wheel Blaster | Pivoting Oscillating High Pressure Spinning Wheel Blaster |
| Material Construction | Heavy-Duty Stainless Steel Frame & Components | Heavy-Duty Stainless Steel Frame & Components |
| Frame Material | Heavy-Duty Stainless Steel | Heavy-Duty Stainless Steel |
| Equipment Width | 20″ (~50.8 cm) | 19-1/2″ (~49.5 cm) |
| Equipment Height | 28-5/8″ (~72.7 cm) | 25-1/2″ (~64.8 cm) |
| Equipment Length | 20″ / 18.5″ (depending on frame setup) | 20″ / 18.5″ (depending on frame setup) |
| Max Water Line Pressure | Up to 900 PSI | Up to 900 PSI |
| Air Cylinder Pressure | 25 – 30 PSI | 25 – 30 PSI |
| Max Cylinder Stroke / Pivot Angle | 3 Inches (-20° to +20°) | 3 Inches (-20° to +20°) |
| Rotation Speed | Variable based on water line pressure | Variable based on water line pressure |
Explore More High Pressure Blasters Products
View All
Learn more
Fixed Rocker Blaster
Fixed Rocker Blaster
The AVW Stainless Steel Rocker Blaster unit helps clean the toughest areas of the vehicle. Whitewalls, wheel wells, wheels, hubcaps, and rockers are given extra attention. Little space is required.
Following Automatic Wheel Blaster
Following Automatic Wheel Blaster
The AVW Stainless Steel Following Wheel Blaster model is used by wheel conscientious tunnel operators. The unit is low profile w/high pressure spray nozzle- 8GPM and fits in the conveyor pit grating area of most tunnels.
Oscillating Top and Side Arch
Oscillating Top and Side Arch
This high-pressure system provides an even spray of the vehicle. Up to 1000 lbs. of pressure. Top oscillator blasts the front, top and rear of vehicles. Side oscillator blasts the sides, tires and rocker areas.
Pivoting Oscillating High Pressure Arch
Pivoting Oscillating High Pressure Arch
The AVW Stainless Steel Pivoting Oscillating High Pressure Arch produces an even spray of up to 1000 Psi over the entire vehicle. Pivoting Top blasts the front, top and rear of vehicles, while the pivoting Side blasters cover both sides, tires and rockers areas.
Pivoting Swirling Side Blaster
Pivoting Swirling Side Blaster
The AVW Pivoting Swirling Side Blaster follows the vehicle, cleaning the rocker area and wheels. It does the best cleaning on hub caps, tires, and wheel wells.
Pivoting Wheel Blaster
Pivoting Wheel Blaster
The AVW Stainless Steel Pivoting Wheel Blaster unit helps clean to toughest areas of the vehicle (whitewalls, wheel wells, wheels) and requires very little space.
