Login
Register
0
Description
Includes: Heavy Duty 4″ x 5-3/4″ Bracket, U-bolts & Fastener Sets
Type: Rear
Mitter Curtain, 12"W x 79"Lg w/4" Cuts, Straight-Cut, Looped/Glued, Cloth - Red
$30.80
Stabilizer Mount Assembly (Rear)
Stabilizer Mount Assembly (Rear)
Includes: Heavy Duty 4″ x 5-3/4″ Bracket, U-bolts & Fastener Sets
$140.00
Includes: Heavy Duty 4″ x 5-3/4″ Bracket, U-bolts & Fastener Sets
Type: Rear
Categories: Friction Equipment, Wraps
`
Related products
Mitter Curtain, 12"W x 79"Lg w/4" Cuts, Straight-Cut, Looped/Glued, Cloth - Black
$30.80
Dryer Finishing Module DJTE-95, Right
$15,549.00
Sprocket, Belt Conveyor, 16 Tooth, 3-1/2" Square Bore, Machined Plastic, Extended Pitch 3.25%
$324.00
Arm Mount
$314.00
UHMW Retractable Mitter Idler Roller
$14.20 – $15.70
Shim
$22.90 – $39.30
Discharge Hose (High Pressure)
$96.50 – $371.00
Intake Hose (PVC) for pump
$11.50 – $195.00
Repair Kit, for GP30-350 Hydraulic Pump KIT
$45.90
Clamp (Damping): 1/2" (with screw fasteners 1/4"-20), for 1 pair hydraulic tubes
$7.50
Chain Tension Bar (1-3/8" X 18-1/2" LG), for Heavy Duty Conveyors, Straight Shaft (uses threaded collar CN3AC5-1016, not included)
$243.00
Drive Shaft, 42" Dual Belt, 56" Long, 2-1/2" Square with Ends Finished 2" Round for Bearings
Call to Place Order
Cover, for Belt Conveyor Gearmotor, for use with 17-Tooth Sprocket, Bolts to Pit Grating
Call to Place Order
Middle Section Frame, 30" Dual Belt Conveyor, 10' LG.
Call to Place Order
Transfer Plate, 30" Dual Belt, 36" x 9", Takeup Section, Passenger Side, Diamond Plate
Call to Place Order
Drive Section, 30" Dual Belt, 3'-8" LG.
Call to Place Order
Middle Section Frame, 42" Dual Belt Conveyor, 10' LG.
Call to Place Order
Transfer Plate, 30" Dual Belt, 36" x 9", Takeup Section, Driver Side, Diamond Plate
Call to Place Order
Shaft, Gear Motor, 12" Single Belt, 2" x 15-1/2"
Call to Place Order
Sprocket, Double, 12" Single Belt, 2-1/2 SQ ADAP
Call to Place Order
Idler (Return) Roller Shaft, 12" Single Belt, 3/4" x 16-1/2" Long
Call to Place Order
Sprocket, Split, Assembled-to-Width Loader Belt, 2-1/2" Square Bore
Call to Place Order
Drive Shaft, SQ, 12" Single Belt
$710.00
Support Roller Bracket, Belt Conveyor, 1/2" x 1-1/2" x 2" Lg.
$15.80
Transfer Plate, 30" Dual Belt, 36" x 7-1/2", Drive Section, Driver Side, Diamond Plate
$540.00
Filler Section Frame, 30" Dual Belt Conveyor, Per foot
Call to Place Order
Adapter-Split Sprocket, 3-1/2" to 2-1/2" Square
$61.70
Idler (Return) Roller Assembly for 1" Wide Pushers, 12" Single Belt
$675.00
Holder for Belt Conveyor Drain Container, Inside (Trench Side) of Conveyor Frames
$20.10
Brush, 51072-5220, Wrap Hugger, Cloth Only, per brush
Call to Place Order
Brush 51070-5020, Wrap Hugger, NeoGlide? Only, Straight-Cut, per brush
Call to Place Order
Brush 51072-5220, Hugger Van High Side Washer, Cloth Only, Straight-Cut, per brush
Call to Place Order
Brush 54X82, Top Brush, Foam Only, AVW Style, per brush (Core sold separately)
Call to Place Order
Brush 116X94, Stepped (Poodle Style), 4-Bolt Spindle Mount Design, Soft HX Bristle
$1,390.64
Tire Brush-4 Bolt Spindle Mount Design, Soft Feather Tip Bristle
Call to Place Order
Brush 5X55, Drying Hugger, with Core, Drytex, Blue
Call to Place Order
Brush 5X55, Drying Hugger, with Core, Dry Soft, Side Brush-AVW
Call to Place Order
Brush 1241, Rocker, NeoGlide? Only, Straight-Cut, NeoGlide?, AVW Style, per brush
Call to Place Order
Brush 1041, Rocker, Cloth Only, Straight-Cut, per brush
$900.00
Brush 1041, Rocker, Cloth Only, Straight-Cut, per brush
Call to Place Order
Brush 1221, Rocker, Cloth Only, Electric Drive, Straight-cut, Cloth, per brush
$531.00
Brush 1221, Rocker, NeoGlide? Only, Straight-cut, per brush
Call to Place Order
Brush 1021, Rocker, Cloth Only, Straight-cut, per brush
Call to Place Order
Brush 1251, Upper Contour, Cloth Only, Kaady Design (drive from top), Electric Drive, Straight-Cut Cloth, per brush
Call to Place Order
Brush 1251, Upper Contour, NeoGlide? Only, Kaady Design (drive from top), Straight-Cut, per brush
Call to Place Order
Brush 1051, Upper Contour, without Core, Kaady Design (drive from top) Straight-Cut Cloth, per brush
Call to Place Order
Brush 1221, Lower Contour, NeoGlide? Only, Kaady Design (drive from bottom), Straight-cut, per brush
Call to Place Order
Brush 1021, Lower Contour, without Core, Wavy-Cut? Cloth, per brush
Call to Place Order
Brush 1221, Lower Contour, Cloth Only, Kaady Design (drive from bottom), Electric Drive, Straight-Cut Cloth, per brush
$965.00
Brush 1251, Upper Contour, NeoGlide? Only, AVW Design (drive from bottom), Electric Drive, Straight-Cut, per brush
$2,019.00
Brush 1051, Upper Contour, Cloth Only, AVW Design (drive from bottom), Straight-Cut, per brush
Call to Place Order
Brush 1021, Lower Contour, NeoGlide? Only, AVW Design (drive from top), Straight-Cut, per brush,
Call to Place Order
Brush 1021, Lower Contour, Cloth Only, AVW Design (drive from top), Straight-Cut, per brush
Call to Place Order
Holder for Belt Conveyor Drain Container, Outside (Floor Side) of Conveyor Frames
$20.10
UHMW Roller for Return Belt Guide for Belt Conveyor, for 3/4" Stainless Shaft
$45.80
Top Brush Core: 8" Diameter x 82"LG
Call to Place Order
Core 51070-5020, Hugger, Core Only, for Wrap and Van High Side Washer, per core
$484.00
Core 51072-4428, Hugger, Core Only, per core
Call to Place Order
Core 50072-0000, Hugger, Core Only, for Wrap and Van High Side Washer, per core
Call to Place Order
Core 1028, Rocker, Core Only, per core
Call to Place Order
Core 1041, Rocker, Core Only, per core
Call to Place Order
Core 1021, Rocker, Core Only, per core
Call to Place Order
Core 1051, Upper Contour, Core Only, AVW Design (drive from bottom), per core
Call to Place Order
Core 1021, Lower Contour, Core Only, AVW Design (drive from top), per core
Call to Place Order
Core 1021, Lower Contour, Core Only, Kaady Design (drive from bottom), per core
Call to Place Order
Core 1050, Upper Contour, Core Only, Kaady Design (drive from top), per core
Call to Place Order
Shim: 11-1/2" x 3" x 10 ga, SS, for 2-15/16" Belt Conveyor Drive Shaft Bearing
$35.80
Key (Shaft), Dual Belt Conveyor
$5.78 – $14.30
Support Roller Bracket, Belt Conveyor
$15.80
Plate: 5" x 5-3/4" (1/4" Thick)
$121.00
Step Up Wrap Arm: 14", 76" LG, Passenger Side
Call to Place Order
Post for Crossbar, Dual Arm Top Brush
$293.00
Leg for Top Brush Frame
Call to Place Order
Street Tee Barstock: 1/4"NPT
$5.24
Manifold Assembly for Robot High Side Blaster 35"
$3,148.00
Shock Absorber Bracket: Rocker Panel & Contour Retract Kit
$70.80
Tank for D10 Pump Stations, 30" x 16" x 20" H
Call to Place Order
Suction Strainer: 1-1/4"NPT port size x 8" H
$127.00
Belt Guard, D10
$411.00
Gearmotor, 1.5 HP, 79 rpm, RF27 for All Electric Drive Equipment
Call to Place Order
Wrap Retract Kit w/o Air Control Panel
$494.00
Conveyor Drive Section Frame Only (Heavy Gauge)
Call to Place Order
Flexible Shaft Coupling Insert for Coupling, (Spider)
$21.50
Roller Chain, Double Strand, (#40-2), 1/2" Pitch, 0.312" dia., per foot
$17.30
Chain Link, Chain Coupling, #80 Double Strand Cotter Pinned Connecting Link
$13.00
Drum, 144" People Mover, Take-Up and Drive, People Mover Conveyor, 5'-6" Lg.
Call to Place Order
Transfer Plate, Drive Section, People Mover 144" Detail Belt, 1/4" x 13" x 48" (3 read)
Call to Place Order
Detail Belt 12' Wide, 144" People Mover, Black Belt, per ft.
Call to Place Order
Detail Belt 12' Wide, 144" People Mover, Black Belt w/ Yellow Safety Stripe, per ft.
Call to Place Order
End Plug (Gate) to Retain Pin
$1.00
Wear-Resistant Web Sling, 6' Length
$47.80
6" Black End Module 30" Dual Belt
$5.00
Junction Box for Gearmotor, 1.5 HP, 83 rpm @ 60 Hz, for Electric Drive
$180.00
Gearbox, Mat Cleaner
$732.00
Gearmotor, Belt Conveyor Drive, SEW Eurodrive KA107BDRN180M4, 90.96 Ratio/20 rpm
Call to Place Order
Gearmotor, Mitter Curtain Drive, SEW Eurodrive S67BDRN90L4/DH, 36.85 Ratio/48 rpm (Blue Green)
Call to Place Order
Gearmotor, Belt Conveyor Drive, SEW Eurodrive KA87BDRN132M4, 79.34 Ratio/22 rpm (Blue Green)
Call to Place Order
Gearmotor, Belt Conveyor Drive, SEW Eurodrive KA107BDRN160M4, 90.96 Ratio/20 rpm, (Gray)
Call to Place Order
Gearmotor, Belt Conveyor Drive, SEW Eurodrive KA107BDRN160L4, 90.96 Ratio/20 rpm (Blue Green)
Call to Place Order
`
Last seen
Stabilizer Mount Assembly (Rear)
$140.00
